Few things are more frustrating than a wobbly towel rack that pulls away from the wall. Whether it's the weight of damp towels or just daily use, a poorly anchored rack can quickly become an eyesore and a hassle. The good news is, you don't need a wall stud to securely mount a towel rack; the right drywall anchors can provide a rock-solid hold.

This guide will walk you through choosing and installing the best anchors, ensuring your towel rack stays put for years to come, saving you both money and future headaches.

## Quick plan (TL;DR)

*   **Assess your needs:** Consider towel rack weight and usage frequency.
*   **Choose the right anchor:** Toggle bolts or heavy-duty self-drilling anchors are generally best for towel racks.
*   **Locate studs:** Always check for studs first, as they offer the strongest mounting points.
*   **Mark and drill:** Precisely mark pilot holes, ensuring they are level.
*   **Install anchors:** Follow manufacturer instructions for your chosen anchor type.
*   **Mount the rack:** Secure the towel rack firmly to the installed anchors.
*   **Test stability:** Give it a gentle tug to ensure it's secure.

## Before you start

Mounting a towel rack in drywall without hitting a stud requires careful planning, but it's a very achievable DIY project for most homeowners and renters. The scope of this guide covers selecting and installing appropriate drywall anchors specifically for towel racks, a relatively light-duty application compared to, say, a TV mount. However, choosing the wrong anchor type or improper installation can lead to a saggy rack, damaged drywall, or repeated repair attempts.

*   **Skill Level:** Beginner to Intermediate DIYer.
*   **What can go wrong:**
    *   **Loose Rack:** Using anchors that aren't strong enough for the towel rack's weight or frequent use.
    *   **Wall Damage:** Drilling oversized holes or improperly installing anchors can mar your drywall.
    *   **Hitting Obstructions:** Drilling into electrical wires or plumbing pipes can cause significant damage and present serious safety hazards.

## Tools & materials

Gathering everything before you begin will streamline your installation process.

### Tools

*   [ ] Pencil
*   [ ] Tape measure
*   [ ] Level (torpedo or longer)
*   [ ] Stud finder (electronic is ideal)
*   [ ] Cordless drill/driver
*   [ ] Drill bits (sized for pilot holes/anchors)
*   [ ] Screwdriver (Phillips or flathead, depending on rack/anchor screws)
*   [ ] Utility knife (optional, for scoring painter's tape)
*   [ ] Safety glasses

### Materials

*   [ ] Your chosen towel rack
*   [ ] Appropriate drywall anchors (e.g., toggle bolts, heavy-duty self-drilling anchors)
*   [ ] Painter's tape (for marking and protecting surfaces)
*   [ ] Cleaning cloth (for dust)

## Time, cost, and difficulty

This project is generally straightforward, but precision is key for a successful outcome.

*   **Time:** Expect to spend 1-2 hours from start to finish. This accounts for planning, measuring, installation, and cleanup.
*   **Cost:** The cost can range from $10 to $50, primarily depending on the price of your chosen towel rack and the quality/type of anchors you purchase. Anchors typically cost a few dollars for a pack.
*   **Difficulty:** Easy to Moderate. The difficulty increases slightly if you encounter unexpected obstructions in the wall or are working with particularly delicate drywall. Your experience level with a drill will also play a role.

## Step-by-step instructions

Follow these steps carefully for a secure towel rack installation.

1.  **Prepare Your Workspace and Gather Tools:** Ensure you have ample light and all necessary tools and materials within reach. Clear the area below where you'll be working.

2.  **Locate Wall Studs:** Even if you plan to use drywall anchors, *always* use a stud finder to sweep the wall thoroughly where you intend to mount the rack. **Rule of thumb:** A common rule of thumb for stud spacing is 16 inches on center, but always verify with a stud finder. If you find a stud where one of your rack's mounting points will be, excellent! You can screw directly into the stud for maximum strength. If both points hit studs, even better. If not, proceed to step 3 for anchor installation.

3.  **Mark Anchor Points:**
    *   Hold your towel rack hardware up to the wall in its desired location. Use your level to ensure it's perfectly straight.
    *   Lightly mark the center of the screw holes for each mounting bracket with a pencil. You can place painter's tape over the area first to make pencil marks more visible and prevent drill bit wander.
    *   Double-check that your marks are level and spaced correctly according to the rack's design. This is your "measure twice, cut once" moment.

4.  **Drill Pilot Holes:**
    *   Refer to your chosen drywall anchor's instructions for the correct drill bit size. This is crucial for proper anchor engagement.
    *   **Safety Note:** Before drilling, especially in bathrooms or near outlets, use your stud finder's wire/pipe detection mode if available, and try to visualize potential electrical or plumbing lines. Drill slowly and shallowly at first.
    *   Drill straight into the marked spots. Ensure the hole is just deep enough for the anchor to sit flush or as specified by the manufacturer.

5.  **Install Drywall Anchors:**
    *   **Toggle Bolts:** For toggle bolts, push the metal wings through the drilled hole. They will spring open behind the drywall. Pull the anchor body back towards you until the wings are snug against the inside of the drywall, then tighten the screw.
    *   **Self-Drilling (Screw-in) Anchors:** These typically don't require a pilot hole (check manufacturer instructions). Drive them directly into the drywall with a Phillips head bit on your drill/driver until they are flush with the wall surface.
    *   **Expansion Anchors:** Push these plastic anchors into the pilot hole until flush, then insert the screw, which expands the anchor to grip the drywall.
    *   *Always follow the specific instructions for your chosen anchor type.* Over-tightening can strip the drywall or anchor.

6.  **Mount the Towel Rack:**
    *   Align the towel rack's mounting brackets with the installed anchors.
    *   Insert the screws (usually provided with the rack or anchors) through the brackets and into the anchors. Tighten them firmly but do not overtighten, as this can strip the anchor or damage the drywall.

7.  **Test Stability:** Gently pull down and outward on the towel rack to ensure it feels secure. If there's any wobbling, re-check the tightness of the screws and anchors.

8.  **Clean Up:** Wipe away any pencil marks or dust, and enjoy your securely mounted towel rack!

## Common mistakes to avoid

*   **Skipping the stud finder:** Always check for studs; they're the strongest points.
*   **Using the wrong anchor type:** A basic plastic expansion anchor won't hold up to a heavy towel rack or frequent use. Opt for toggle bolts or heavy-duty screw-in anchors.
*   **Drilling the wrong size pilot hole:** Too small, and the anchor won't go in; too large, and it won't grip.
*   **Not leveling:** A crooked towel rack is an immediate indicator of a rushed job.
*   **Over-tightening screws:** This can strip the anchor or crack the drywall.
*   **Ignoring weight limits:** The rack might hold empty, but damp towels add significant weight.

## Troubleshooting

Here’s what to do if things don’t go perfectly:

*   **Symptom:** Towel rack feels wobbly after installation.
    *   **Likely Cause:** Screws are loose, anchors aren't fully engaged, or anchors are too weak for the load.
    *   **Fix:** Tighten screws. If still wobbly, remove rack, check anchors for damage or improper installation. Consider upgrading to stronger anchors if they seem inadequate.
*   **Symptom:** Drywall anchor spins freely when trying to tighten the screw.
    *   **Likely Cause:** Pilot hole is too large, or the anchor is stripped/damaged.
    *   **Fix:** Carefully remove the anchor. You may need to patch the hole with spackle/joint compound, let it dry, and then redrill a new pilot hole (slightly offset if possible) or use a larger toggle bolt that can span the damaged area.
*   **Symptom:** Drill bit slips when starting a pilot hole.
    *   **Likely Cause:** Smooth wall surface, lack of pressure, or dull bit.
    *   **Fix:** Apply painter's tape over the mark before drilling. Press firmly but not excessively. Use a sharp drill bit. Start with a smaller bit if needed, then enlarge.
*   **Symptom:** Hole created is too big for the chosen anchor.
    *   **Likely Cause:** Incorrect drill bit size or accidental over-drilling/wobbling.
    *   **Fix:** Do not proceed with the undersized anchor. Patch the hole and re-drill, or use a larger anchor (e.g., a toggle bolt that can accommodate the larger hole).
*   **Symptom:** Towel rack pulls away from the wall over time.
    *   **Likely Cause:** Anchors were insufficient for the weight or leverage, or drywall deteriorated around the anchor.
    *   **Fix:** Remove the rack and anchors. Repair the damaged drywall (e.g., with a drywall patch kit). Reinstall using much stronger anchors, such as heavy-duty toggle bolts, ensuring they are placed in fresh, sturdy drywall.

## Safety notes

Your safety is paramount. Please observe these precautions:

*   **Eye Protection:** Always wear safety glasses when drilling or driving screws to protect against flying dust or debris.
*   **Dust Control:** Drilling into drywall creates dust. Consider wearing a dust mask, especially if doing multiple holes, and ensure good ventilation.
*   **Electrical & Plumbing:** Before drilling, use an electronic stud finder with wire and pipe detection. Be extra cautious in areas near outlets, light switches, and plumbing fixtures (sinks, toilets, showers). If you suspect electrical wires or pipes are present, consider repositioning your rack or consulting a professional electrician or plumber.
*   **Ladder Safety:** If using a step ladder, ensure it's stable on a flat surface and follow all manufacturer guidelines.

## FAQ

**Q: Can I just use standard screws in drywall without anchors?**
A: No. Standard screws won't grip drywall effectively and will pull out quickly, especially with the leverage and weight of a towel rack. Always use appropriate drywall anchors.

**Q: What if I hit a stud where I want to install an anchor?**
A: Great! If you hit a stud, you can often discard the anchor for that spot and screw directly into the stud with a wood screw of appropriate length and gauge. This provides the strongest hold.

**Q: Which anchor type is best for a very heavy or frequently used towel rack?**
A: For maximum strength, especially with heavier towel racks or those that see a lot of activity (like in a kids' bathroom), metal toggle bolts (like Snaptoggles or traditional toggle wings) are generally considered the strongest option for drywall.

**Q: Can I use these anchors in plaster walls?**
A: While some drywall anchors can work in plaster, plaster walls are denser and more brittle than drywall. For plaster, specialized plaster anchors, or traditional toggle bolts, might be more suitable. Always test in an inconspicuous area and consult manufacturer guidelines.

**Q: How much weight can a typical drywall anchor hold?**
A: The weight capacity varies greatly by anchor type, size, and manufacturer. Light-duty plastic anchors might hold 5-10 lbs, while heavy-duty toggle bolts can hold 50-100+ lbs in optimal conditions. *Always check the specific weight rating on the anchor's packaging.* A rule of thumb is to choose anchors rated for at least twice the expected maximum load (rack + wet towels).

## Sources & claims handling

For best results and safety, always consult manufacturer instructions for your specific tools and anchors. Building codes and requirements can vary by location; if unsure, check with your local building department. Reputable organizations provide general safety guidance:

*   Occupational Safety and Health Administration (OSHA)
*   National Fire Protection Association (NFPA)
*   Consumer Product Safety Commission (CPSC)
*   Underwriters Laboratories (UL)
*   Specific Anchor Manufacturer Instructions
*   Local Building Department Guidelines

Installing a towel rack securely in drywall is a straightforward project that adds functionality and style to your home. By choosing the right anchors and following these detailed steps, you can achieve a professional-looking result that stands the test of time. Remember to prioritize safety and double-check your work, and you'll enjoy your new, sturdy towel rack for years to come.

Learn how to choose and install the best drywall anchors for a sturdy towel rack. This DIY guide helps homeowners prevent sagging and wasted money.

Towel Rack — posts & guides

Choose the Best Drywall Anchors for a Secure Towel Rack